manualshive.com logo in svg

Fluke OC3port Plus, User Manual

Share
Download
Fluke OC3port Plus User Manual Download Page 99

OC3port Plus

Users Manual

4-20

Table 4-4. Alarms Transmitted by the OC3port Plus

Alarm

Action Performed When You Select ON

Section LOS

Forces the transmission bit stream to all zeros, which causes
transmission to stop.

Line AIS

Sets all bits in the SONET STS-3c frame to logic 1 prior to scrambling.

Line FERF

Transmits a binary value of ‘110’ in bit positions 6, 7 and 8 of the STS-
3c K2 byte.

Path AIS

Overwrites the SPE and Pointer bytes H1, H2, and H3 with ones.

Path FERF

Sets the G1-FEBE field to a binary value of ‘1001’.

Turning Off an Alarm

To turn off an alarm, do the following:

1.

 

Press the 

ALARMS

 key. The 

ALARM SELECTION

 menu displays.

2.

 

Press the 

Down Arrow

 key to move the alarm you want to turn off to the

selection line.

3.

 

Press the 

Left

 or 

Right Arrow

 key to select the 

OFF

 setting for any of the alarms

on this menu. See Table 5-4 for a complete list and description of SONET
alarms.

The alarm you select is immediately turned off.

Viewing Alarms Stored in the Alarm Log

The OC3port Plus keeps a history of the alarms received in an alarm log. The
tester can store as many as 128 alarms in this log along with such information as
the type of alarm, the date the alarm was received, the starting and ending times of
the alarm, and the duration of the alarm.

This section shows you how to access the alarm log and the type of information
the tester maintains on the alarms in the log. It also shows you how to remove all
the alarms from the alarm log.

To view alarms stored in the alarm log, follow these steps:

1. Press the 

ALARMS

 key. The 

ALARM SELECTIONS

 menu is displayed.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for OC3port Plus

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands