Testing ATM Networks
Scanning Circuits for ATM Activity
6
6-35
Step One: Set up the boundaries of the search
To set up the boundaries of the scan, do the following:
1. Press the
AUTO
key. The
AUTO SELECTIONS
menu is displayed.
2.
Press the
Down Arrow
key to move the
ATM Activity Scan
option to the
selection line. Then, press
ENTER
. The
ATM ACTIVITY SCAN
submenu is
displayed:
ATM ACTIVITY SCAN:
- - - - - - - - - - - - - - - - - - - - - - -
Start Activity Scan
Setup Activity Scan
za115f.eps
3.
Press the
Down Arrow
key to move the
Setup Activity Scan
option to the
selection line. Then, press
ENTER
. The
AUTO-SCAN PARAMETERS
submenu is
displayed:
AUTO-SCAN PARAMETERS
- - - - - - - - - - - - - - - - - - - - - - -
VPI MIN: 0000
VPI MAX: 0255
za116f.eps
From this submenu, you can set the search boundaries to limit the address
space over which the OC3port Plus searches for ATM activity. There are four
items that you can edit:
VPI MIN:
0000
Minimum virtual path address to begin the search with.
VPI MAX:
0255
Maximum virtual path address to end the search with.
VCI MIN:
00000
Minimum virtual circuit address to begin the search with.
VCI MAX:
65535
Maximum virtual circuit address to end the search with.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
