manualshive.com logo in svg

Fluke OC3port Plus, User Manual

Share
Download
Fluke OC3port Plus User Manual Download Page 72

Setting Up and Operating the OC3port Plus

Performing Basic Operations

3

3-25

Deleting a Single Record

To delete a single test record, follow these steps:

Caution

Be careful when you delete a stored test record. Deleting
a stored test record cannot be undone.

1.

 

Press the 

AUTO

 key to display the 

AUTO SELECTIONS

 menu.

2.

 

Make sure that the 

Auto Store

 option is on the selection line. Then, press

ENTER

. The 

AUTO STORE

 submenu is displayed.

3.

 

Press the Down Arrow key to move the 

Review Records

 to the selection line.

Then, press 

ENTER

. The 

REVIEW RECORDS

 submenu is displayed: option

 REVIEW RECORDS:              

    

- - - - - - - - - - - - - - - - - - - - - - - -  

Bert                                        

Cell Loss                                

za031f.eps

4.

 

Move the name of the group containing the test record you want to delete to
the selection line. Then, press 

ENTER

. The first test record in the group you

selected is displayed.

5.

 

Press the 

Up

 or 

Down Arrow

 key to display the particular test record you want

to delete. Then, press the 

CLEAR

 key. The individual test record you selected

is deleted from the tester’s memory.

Deleting All Stored Records in a Test Group

To delete all test records in a group from storage, do the following:

Warning

Be careful when you delete a stored test record. Deleting
a stored test record cannot be undone.

1.

 

Press the 

AUTO

 key to display the 

AUTO SELECTIONS 

menu.

2.

 

Make sure the 

Auto Store

 option is on the selection line. Then, press 

ENTER

.

The 

AUTO STORE

 submenu is displayed.

3.

 

Press the 

Down Arrow

 key to move the Delete Records option to the selection

line. Then, press 

ENTER

. The 

DELETE RECORDS

 submenu is displayed:

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for OC3port Plus

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands