Setting Up and Operating the OC3port Plus
Programming the Overall Operation of the OC3port Plus
3
3-11
You are in Edit mode as indicated by the flashing "
U"
in the first position of
the
INFO
field. The name
UNASSIGNED
is the default name assigned to each
parameter set.
The name you choose can be one to ten characters long.
4.
Press the
Up
or
Down
key to display the desired letter or number in the first
position of the
INFO
field.
5.
Then, press the
Right Arrow
key to move to the next position.
6.
Continue pressing the arrow keys in this manner until the name you want is
displayed.
7.
When you finish, press
ENTER
to save the newly created name.
Complete this procedure for each parameter set that you want to name.
Switching to a Different Parameter Set
To switch to the other parameter set, follow these steps:
1. Press the
OPTIONS
key. The
OPTION SELECTIONS
menu is displayed.
2.
Make sure that the
Parameter Set
option is on the selection line.
3.
Then, press the
Left
or
Right Arrow
key to display the number of the parameter
set that you want to switch to.
4.
Press
ENTER
.
The OC3port Plus immediately reboots and switches to the parameter set that
you selected.
Editing a Parameter Set
When you change the setting for an option or re-configure a setup, those changes
are automatically stored in the parameter set that is currently active.
Therefore, when you want to edit a parameter set, first activate the parameter set
that you want to edit. (See "Creating a Parameter Set" if you need to know how to
activate a parameter set.)
Then, make the desired changes, which the OC3port Plus automatically stores in
the parameter set you are working in.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
