manualshive.com logo in svg

Fluke OC3port Plus, User Manual

Share
Download
Fluke OC3port Plus User Manual Download Page 43

OC3port Plus

Users Manual

2-18

3.

 

Press 

ENTER

. You are now accessing the 

STS-3c SETUP

 submenu:

 STS-3c SETUP:           

            

     

- - - - - - - - - - - - - - - - - - - - - - -  

      Path Auto YEL                  OFF   

    Line Auto FERF                OFF 

za015f.eps

This submenu contains all of the STS-3c setup parameters. You navigate
through this and all other submenus by pressing the 

Up

 or 

Down Arrow

 key to

move an option to the selection line and then pressing the 

Left

 or 

Right

 

Arrow

key to choose a value for the option.

Exiting OC3port Plus Submenus

 

To leave a submenu, simply press the 

ESC

 key to return to the introductory

display, or press any one of the direct access keys to begin a specific test or
perform a setup.

Connecting the OC3port Plus

 

Depending on the specific physical interface, the OC3port Plus is designed to be
connected to either intermediate-range, single-mode fiber systems, multi-mode
fiber optic systems, or unshielded twisted pair-155 systems. A single-mode
OC3port Plus uses fiber optic connectors located on the top of the tester.

 

The multi-mode version of the OC3port Plus is designed to be connected to multi-
mode fiber systems. This version uses the SC Duplex fiber-optic connectors
located on the top of the tester.

 

The UTP-155 version of the OC3port Plus is designed to be connected to UTP-155
networks.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for OC3port Plus

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands