manualshive.com logo in svg

Fluke OC3port Plus, User Manual

Share
Download
Fluke OC3port Plus User Manual Download Page 42

Getting Started

Getting Acquainted with the OC3port Plus Menus

2

2-17

5. Press the 

Up

 or 

Down Arrow

 

key until the value you want in the first position of

the VCI field is displayed. Then, press the 

Right Arrow

 key to move to the next

position.

6. Continue pressing the 

Up

 or 

Down Arrow

 key to display the desired value and

the 

Right Arrow

 key to move to the next position in the field.

7. When you are finished making changes, do one of the following:

a.

Press the 

ENTER

 key. You exit Edit mode. The tester saves your changes.

b. Press the 

EDIT

 key. You exit Edit mode. The tester does not save your

changes and restores the original value.

Accessing OC3port Plus Submenus

Many options on the OC3port Plus menus have an extended menu or submenu that
you have to access when you need to change their parameters. Some of the
OC3port Plus tests, for example, have many parameters, so to modify these, you
may have to access a submenu.

Typically, any option on a menu that appears by itself (that is, with no setting to its
right) has an additional menu (submenu) associated with it.

The following example shows you how to access an OC3port Plus submenu.

1.

 

Press the 

SONET

 direct access key. The 

SONET SELECTIONS

 main menu is

displayed. For example:

        

SONET      SELECTIONS

             

     

- - - - - - - - - - - - - - - - - - - - - - -  

   Monitor STS-3c                        

Insert Errors                          

za013f.eps

2.

 

Press the 

Down Arrow

 key until the 

Setup STS-3c

 option is on the selection line

as in the following:

      

SONET      SELECTIONS

             

Insert Errors                          

Setup STS-3c                        

     Pointer Actions                          

za014f.eps

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for OC3port Plus

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands