manualshive.com logo in svg

Fluke OC3port Plus, User Manual

Share
Download
Fluke OC3port Plus User Manual Download Page 17

OC3port Plus

Users Manual

1-4

 

This book also contains a Glossary of terms that are used throughout this manual.
Terms found in the Glossary area highlighted in text when they are first used.

Notations and Typographical Conventions

 

The following notations and typographical conventions are used in this manual:

 

Key names

 

The names of keys are in boldface type.

 

For example, the AUTOTEST key and the Print key.

 

Key sequences

 

A plus sign, as in SHIFT 1 + M, indicates that you should press and hold down
the SHIFT 1 key and then press the M key.

 

Screen names

 

The names of screens are in capital letters and boldface type.

 

For example, the SYSTEM INFORMATION screen.

 

Options

 

Options are boldface type. For example, the Date option.

 

Arrow keys

 

The arrow keys are the four keys that encircle the ENTER key.

 

The name of an individual arrow key refers to the direction in which the arrow
points: the Down Arrow key, the Left Arrow key, the Right Arrow key, and
the Up Arrow key.

 

Italics

 

Italic type is used for emphasis.

 

For example: Do 

not operate the unit in the presence of flammable gases.

 

Lists

 

Procedures are shown in sequentially numbered lists.

 

Monospace

 

Monospace type is used to indicate messages displayed on the tester’s LCD.

 

For example, 

INITIALIZING ANALYZER.

 

Cautions

 

A caution message advises you that failure to take or avoid a specific action
can result in loss of data.

 

All cautions are preceded by the word Caution.

 

Warnings

 

A warning message cautions you that failure to take or avoid a specific action
can result in physical harm to you or damage to the tester.

 

All warnings are preceded by the symbol 

 and the word  Warning.

OC3port Plus Features and Capabilities

The OC3port Plus combines SONET testing features with advanced ATM testing
features, giving you the ability to quickly test and troubleshoot any OC3 circuit as
well as test ATM equipment and services for proper operation and conformance.

At the physical layer, the OC3port Plus can be used to diagnose many common
OC3 network problems. The tester provides complete OC3 Section, Line, and Path
error and alarm transmission and monitoring capabilities that enable you to

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for OC3port Plus

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands