manualshive.com logo in svg

Fluke OC3port Plus, User Manual

Share
Download
Fluke OC3port Plus User Manual Download Page 57

OC3port Plus

Users Manual

3-10

4.

 

You can now create the parameter set you selected. Any setups or
configurations that you create are automatically stored within this parameter
set as you make them.

Naming a Parameter Set

To distinguish one parameter set from another, you can give each a unique,
identifying name. For example, if one of your parameter sets contains ATM setups
and tests, you can give it the name "ATM Tests". Or, if you share the OC3port
Plus with another person and each of you has created a parameter set, you can each
identify your parameter set with your own name.

Follow these steps to create a name for your parameter sets.

1. Press the 

OPTIONS

 key. The 

OPTION SELECTIONS

 menu is displayed.

2. Make sure that the 

Parameter Set

 option is on the selection line. Do one of the

following:

a.

If you want to name the active parameter set, go to Step 3.

Note

The active parameter set is the one represented by the number to the
right of the 

Parameter Set

 option.

b. If want to name one the other parameter set, press the 

Left

 or 

Right Arrow

key to display the desired set. Then, press 

ENTER

. The OC3port Plus

reboots and activates the parameter set you selected. Go to Step 3.

3.

 

Press the 

Down Arrow

 key to move the 

User Info

 option to the selection line.

Then, press 

ENTER

. You see this display:

USER INFO

INFO:    UNASSIGNED_ _

za020f.eps

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for OC3port Plus

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands