DPCTrack2
Users Manual
24-6
24.2.3 Show Logged Data Button
After the Upload is complete, click the
Show Logged Data
button to navigate to the
Logged Data record you just uploaded. See Figure 24.4 below.
Figure 24.4
24.2.4 Log Record
Upon navigating to the record you just uploaded, several automatically populated fields
are visible. This portion of the page contains information pulled from the logged record
and the Tag ID. These fields are not modifiable. They include:
24.2.4.1 Data Log ID
This field displays the log record identifier assigned by the system.
24.2.4.2 Item Type
This field displays the asset type i.e. Instrument or Loop for which the logged data was
captured.
24.2.4.3 Item ID
This field displays the asset identifier for the Instrument or Loop.
24.2.4.4 Tag ID
This field displays the asset identifier entered on the calibrator, at the time of upload, for
the Instrument or Loop. This may or may not be the same as the Item ID.
24.2.4.5 Logged By
This field displays the ID of the individual responsible for the upload.
24.2.4.6 Manufacturer
This field displays the manufacturer for the Instrument or Loop ID associated with the
Tag ID.
24.2.4.7 Model Number
This field displays the model number for the Instrument or Loop ID associated with the
Tag ID.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com
