DPCTrack2
Users Manual
18-6
18.6.1.3 Setup/Wrapup Messages
You can make messages display on the calibrator before and/or after the calibration
procedure. The following options are available for message prompts:
None
No Message
First Note
Displays the first Note that was added to the Instrument or Loop.
Most Recent Note
Displays the Note that was added most recently to the Instrument
or Loop.
Item Description Fields
Displays the calibrated item's ID, Company, Location, Building,
Department, Associated Document, Associated Equipment, and
Serial Number (if applicable)
Custom Message
Custom Messages are to be entered into the text area directly
under the dropdown list that indicates what the setup message is
comprised of.
SOP Procedure
Displays the Procedure field of the Instrument or Loop’s associated
Document ID. See Chapter 13 on Documents.
If a message's size is beyond the current calibrator's limit, as much of the message will be
processed as possible and may be broken into multiple screens.
18.6.1.4 Default Temperature Standard
This value may be set to use the current calibrator's default but may also be overridden
for the current download session to
ITS-90
or
IPTS-68
.
18.6.1.5 Fluke Options
18.6.1.5.1 Show Prompt on Device for:
DPCTrack2 enables the tester to provide additional information about the tests
they perform in the field through the employment of six checkboxes on the
Download Options
page. If a checkbox is selected, then the tester will be prompted for
that information. The tester’s response to the prompt(s) is saved as part of the testing
information on a per Tag ID basis. The tester can decide if the prompt(s) will be
presented before or after the test.
18.6.1.5.2 Show Prompt (Before/After):
The tester can decide if the prompt(s) will be presented before or after the test.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com
