Calibration Screen
19.4 Test Instruments Tab
19
19-11
Once a calibration record is completed and saved, the text on its button will turn black
and its ID will no longer contain the word “New” next to it. (Note: Each calibration
record must be saved individually. Calibration records cannot be saved as a group.)
Figure 19.5
Calibrations may be dropped from the current group at any time regardless of whether or
not they have been saved. To remove an open calibration record from the current “Multi-
Mode” group, select its button in the toolbar or select it from the
Multi-Mode
menu, then
choose “Drop Current Calibration” from the menu. This will remove the selected
calibration from the current group. To turn off the “Multi-Mode” functionality you must
drop all but one record from the active group, then choose “Turn off Multi-Mode”, again
from the
Multi-Mode
menu. Note: Upon exiting from the Calibration screen, Multi-
Mode will turn off and will have to be reactivated.
19.4 Test Instruments Tab
This tab page allows you to document the Test Instruments that were used in the
calibration. It has two list boxes, titled Available Test Instruments and Test Instruments
Used in Calibration. Noting the Test Instruments used in calibrations is necessary for
most Quality Assurance programs. It can also be useful in the investigation of problem
calibrations, and allows for users to perform reverse traceability on their instrumentation.
All Test Instruments IDs listed are followed by the name of the company that owns them
to make for easier identification. You may select any number of Test Instruments from
the
Available Test Instruments
list and move them to the
Test Instruments Used in
Calibration
list. To do this, highlight the Test Instruments desired and click the center
arrow buttons, as needed.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com
