Loop Record Screen
16.1 Loop Records
16
16-3
16.1 Loop Records
As with the equipment section, it is sometimes useful to associate Instruments with
Loops and even to provide separate calibration certificates for each Loop. DPCTrack2
gives you the ability to manage Loop information. Just like the INSTRUMENT
RECORD screen, the MASTER LOOP RECORD screen is used to enter all of the
Loop’s information that will remain constant, such as classification and department. The
Loop records that you enter will act as the templates for creating calibration records for
those Loops. The MASTER LOOP RECORD screen is accessed by clicking the speed
button labeled
“Loops”
on Record Toolbar.
Figure 16.1
16.2 Tabbed Notebook Section
The tabbed notebook section of the MASTER LOOP RECORD screen contains five (5)
different sub-screens or “pages” available for data entry. These pages are logically
grouped on the tabs of the notebook. To open a tab page click it with your mouse. Each
page and its associated fields are described below.
Note
It is not necessary to fill in all empty fields. However, you must enter a
Loop ID in order to save a new record.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com
