DPCTrack2
Users Manual
24-4
24.2 Uploading Logged Data
To upload Logged Data from the Fluke calibrator to the DPCTrack2 database, first plug
the calibrator into the appropriate port on your workstation, turn the calibrator on, and
select the
Upload Logged Data
button at the top of the screen.
24.2.1 Selecting Port
Select the appropriate port in the
Ports
section, and click
Calibrator Info
below to verify
the application is recognizing the calibrator correctly. Figure 24.2 shows the calibrator
info. If there are no ports present or incorrect calibrator information is displayed, select
the
Refresh
button to refresh the Ports.
Figure 24.2
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com
