The Logged Data Screen
24.1 What is Logged Data?
24
24-3
24.1 What is Logged Data?
Among the many features of DPCTrack2 is the Logged Data screen See Figure 24.1
below. Fluke Documenting Process Calibrators allow users to log and capture data over
time to help spot, diagnose and prevent intermittent problems or anomalies that can cause
facility down time.
Figure 24.1
The Logged Data screen allows users to import recorded data from the Fluke calibrator
directly to the DPCTrack2 database.
Logged data is used to monitor specified conditions in a selected environment and record
periodic measurements. This data is typically not associated with any Tag ID, though it
may be, and therefore stands alone as an independent record and given a unique Log ID.
Example: Record the periodic conditions of a chamber by taking five readings per minute
over a ten minute span. These readings are saved as a log and uploaded to the
DPCTrack2 database and available for review and interpretation.
Note
Uploading data through the Upload/Download screen will not transfer
Logged Data from the calibrator to the DPCTrack2 database. Logged Data
can only be uploaded through the Logged Data screen.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com
