DPCTrack2
Users Manual
18-12
18.8 Uploading Results as Calibrations
You can use DPCTrack2 to Upload Calibration results as new calibration records (See
Figure 18.6 below). For more information about calibration records, see
Chapter 19
Calibration Records.
Figure 18.6
1.
Make sure your calibrator and PC are connected. See Setting Up Communications for
more info.
2.
Check the desired options for uploading calibrations. See chapter 18.6.2 above.
18.8.1 Assign Technician to Calibrations
18.8.1.1 Who Calibrated
Choose your desired "Who Calibrated" value or corresponding option from the main
screen. The DPCTrack2 Calibration screen has a field for 'Who Calibrated' - That is, a
field for the Technician who performed this calibration. The Fluke calibrators can supply
an ID value for the technician using the device. This ID can be associated with the
DPCTrack2 User ID, and further associated with a Technician's Name.
Note
For the program to recognize the User ID, it must be entered into the
device exactly as it appears in the User ID field in the DCPTrack2
Employee Screen.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com
