FHF ExResistTel IP2/IP154, Operating Instructions Manual

Page: 315 / 412

Manual ResistTel IP2 / IP152 Page 315
ExResistTel IP2 / IP154
Type: HTTP /
Type: HTTPS The entries are transmitted to a web server for further processing.
Every single entry is transferred to the web server as form data in
the HTTP GET format.
•
Enter the web server’s IP address under „Address“.
•
In „Port“, you enter the HTTP/HTTPS port number of the
connection.
•
In „Method“ you select the access method. The following
methods are selectable:
o
Standard
o
External (GET)
o
External (POST)
•
In the web server, at „Path“, you enter the relative URL of
the form software. This is only for use with the methods
External (GET) and External (POST).
The device will make a HTTP/HTTPS GET request to the Web
server on the entered URL, followed by the URL-encoded syslog
entry. If, for example, a page named /cdr/cdrwrite.asp with a
form that expects the log message in parameter msg exists on a
Web server, then the value /cdr/cdrwrite.asp is entered. The
device
will then make a GET
/cdr/cdrwrite.asp?event=syslog&msg=logmsg request to the Web
server.
Type: REMOTE-
AP /
Type: REMOTE-
AP-S The logs are transmitted to the REMOTE-AP (Remote Linux
Application Platform) Server. With REMOTE-AP-S a scrambled
transmission will be used.
•
In the Address field, you enter the IP address of the
REMOTE-AP-Servers.
•
In the Port field, you specify the port to which the
REMOTE-AP connection is set up.