FHF ExResistTel IP2/IP154 Operating Instructions Manual Download Page 85 | Manualshive

Page: 85 / 412

background image

Manual ResistTel IP2 / IP152

Page 85

ExResistTel IP2 / IP154

•

If you use the cursor keys to select the menu item Send Message and then

press the key or the repeat dialling key (key (long)), the menu message
appears (refer chapter 3.7.1 on page 115). It is now possible to send a
message to the already entered number.

•

If you use the cursor keys to select the menu item Dial – Show own No. and

then press the key or the repeat dialling key (key (long)), the entered
number will be dialled and at the called telephone the number of the caller will
be displayed.

•

If you use the cursor keys to select the menu item Dial – Hide own No. and

then press the key or the repeat dialling key (key (long)), the entered
number will be dialled and at the called telephone the number of the caller will
be suppressed.

•

If you use the cursor keys to select the menu item Dial – No Diversion and

then press the key or the repeat dialling key (key (long)), the entered
number will be dialled and an activated call diversion will not be executed, if
the PBX supports this feature.

•

If you use the cursor keys to select the menu item Call as User and then press

the key or the repeat dialling key (key (long)), the menu User List
appears (refer to chapter 3.10 on page 130). Now the User can be changed
prior to dialling. The change affects the current call only. This item is only
available, if more than one user is configured and enabled.

•

If you use the cursor keys to select the menu item Dial to – Always and then

press the key  , then the call diversion (refer to chapter 3.8.1 on page 119).
The already entered number will be passed into the field call diversion always
and  the  call  diversion  variant  must  only  be  stored  for  activation.  This  menu
item  is  available  only,  if  the  protocol  H.323  or  the  protocol  option  local  call
forward (refer chapter 4.11.9 on page 360) is configured.

•

If you use the cursor keys to select the menu item Dial to – Busy and then

press the key  , then the call diversion (refer to chapter 3.8.1 on page 119).
The  already  entered  number  will  be  passed  into  the  field  call  diversion  busy
and  the  call  diversion  variant  must  only  be  stored  for  activation.  This  menu
item  is  available  only,  if  the  protocol  H.323  or  the  protocol  option  local  call
forward (refer chapter 4.11.9 on page 360) is configured.

«
...
83
84
85
86
87
...
»

Summary of Contents for ExResistTel IP2/IP154





























































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExResistTel IP2/IP154

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 17

Brand: Panasonic Pages: 2

Brand: Yezz Pages: 15

Brand: Samsung Pages: 170

Brand: Sony Ericsson Pages: 89

Brand: TCL Pages: 19

Brand: SouthernLINC Pages: 63

Brand: Grandstream Networks Pages: 2

Brand: M4 Pages: 22

Brand: Verizon Pages: 10

Brand: Grandstream Networks Pages: 7

Brand: Alcatel Pages: 41

Brand: Blackberry Pages: 126

Brand: GE Pages: 2

Cell Fusion 28129FE2

Brand: GE Pages: 2

Cell Fusion 28127FE1

Brand: GE Pages: 2

Brand: GE Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands