FHF ExResistTel IP2/IP154, Operating Instructions Manual

Page: 296 / 412

Page 296 Manual ResistTel IP2 / IP152
ExResistTel IP2 / IP154
Caution
With using the voltaic separated input lines the input voltage must be 21.5 V – 57 V
DC if using an external power supply.
The following Options are only available for phones with an illuminated keypad.
Incoming Call
Alert Blinking
Period [ticks] Blinking period of an illuminated keypad during an incoming call.
1 Tick corresponds to a period of 40 ms. (25 Ticks
Å
1 Hz). With
an empty field, the keypad will not blink during incoming calls.
Registration Alert
Blinking Period
[ticks] Blinking period of an illuminated keypad during a registration
alarm. 1 Tick corresponds to a period of 40 ms. (25 Ticks
Å
1
Hz). With an empty field, the keypad will not blink during a
registration alarm.
A registration alarm will become active, if at least one of at
registration options marked registrations is marked at
Phone/User-x/General (with x=1…6) as enabled and the state is
not up.
Registration Options
Registration Description
active The registration at Phone/State/Registrations as active marked
will be used for controlling the relay.
1 Registration 1
2 Registration 2
3 Registration 3