Page 114
Manual
ResistTel IP2 / IP152
ExResistTel IP2 / IP154
The message “Entry saved” appears and the display changes into the state of Figure
73.
3.6.4.1.2
Registration
To setup the registration proceed as follows:
1.
With the arrow keys, select the Menu
Registration
.
2.
Press the key . The following will be display:
FHF4 104 +*
Registration
Figure 75: Menu Registration
3.6.5
Multiple Registration
Multiple registrations make it possible to register up to 6 different users for one
telephone. The display indicates which incoming calls are for which user. The data of
the active user is used for outgoing calls. If the call data of another user is to be
transmitted, the active user must be put on hold before the call is set up.
This feature enables a variety of options. It is possible, for example, for a co-worker
working at several locations to log on to the telephone at different workplaces. Or it
is possible to implement the telephone exchange or hotline function by allowing co-
workers to log on as joint users of this circuit. It is also possible to stand in
temporarily for a colleague (his/her call number) with multiple registrations.
Tip
This feature can only be used if it is possible to register call numbers at several
telephones in the PBX component.
Join user setup
The registration of the (up to 6) joint users ensues by editing the menu
Phone/User-1
to
Phone/User-6
on the Web interface of the telephone. Refer to
chapter 4.1 General respectively Web-Interface beginning on page 173.
Summary of Contents for ExResistTel IP2/IP154
Page 43: ...Manual ResistTel IP2 IP152 Page 43 ExResistTel IP2 IP154 Figure 9 Set View ...
Page 386: ...Page 386 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...
Page 387: ...Manual ResistTel IP2 IP152 Page 387 ExResistTel IP2 IP154 ...
Page 390: ...Page 390 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...
