Page 248
Manual
ResistTel IP2 / IP152
ExResistTel IP2 / IP154
Prepare
This is a set option, under which the connection is not
immediately established, but which serves as dialling
preparation in the sense that the number can be completed by
further digits. Only as a consequence of subsequent actions,
like picking up the receiver or turning on the enabling device,
the number is dialled.
Announcement
Set up an announcement call, i.e. a call which should be
automatically accepted by the called phone. This checkmark is
only effective if
Allow Outgoing
for Announcement Calls is
checked on the
Phone->User-x->Preferences
page of the
registration. Further
Reject Incoming for Announcement
Calls
must not be checked on the
Phone->User-x-
>Preferences
page of the called phone.
Send in Active Call Send the digits configured under `Number´ as DTMF digits if
there is an existing connection already. If the phone is idle set
up a call as usual.
Send as Control
Call
Set up a control call to a special PBX object, for example to
control special voice mail features. For a control call no media
channel is established.
4.7.1.5.4
Function Key Partner
The partner function is subdivided into three states.
Idle
In this idle state, the key performs direct dialling.
Alerting
This state indicates that the partner telephone rings, and you
can use this key to answer the call (pick-up).
Busy
In case the line is busy, the function key indicates the partner
state only.
Summary of Contents for ExResistTel IP2/IP154
Page 43: ...Manual ResistTel IP2 IP152 Page 43 ExResistTel IP2 IP154 Figure 9 Set View ...
Page 386: ...Page 386 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...
Page 387: ...Manual ResistTel IP2 IP152 Page 387 ExResistTel IP2 IP154 ...
Page 390: ...Page 390 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...