Page 90
Manual
ResistTel IP2 / IP152
ExResistTel IP2 / IP154
3.3.8
Switching
You can switch between two connections using the switch function.
Torsten 72
Peter 36
Torsten 72
Thomas 70
06.01.10 14:40 0:22
Figure 42: Switching
1.
Press the key (short) two times or the key (short) followed by the key
during a call with an active line and a line on hold. The active line is put on hold
and the line on hold is activated (see Figure 42).
2.
To terminate the active line, you must press the key . The connection to the
active conversation partner is terminated.
Please note also the tip in chapter 3.3.7 "Making second Call" beginning on page 89.
3.3.9
Transferring a Call
You are making a call and would like to transfer it to another party.
Torsten 72
Peter 36
Torsten 72
Thomas 70
06.01.10 14:40 0:22
Figure 43: Transferring a Call
1.
Press the key (short) during a call.
The call is put on hold. You hear a dial tone. The line on hold is displayed
normally and the active line inversely.
2.
Dial the call number of your choice.
The connection is established. If the called party answers, this can be treated like
a second call, as above.
3.
To connect the caller will be connected with the dialled number you have the
following possibilities:
Summary of Contents for ExResistTel IP2/IP154
Page 43: ...Manual ResistTel IP2 IP152 Page 43 ExResistTel IP2 IP154 Figure 9 Set View ...
Page 386: ...Page 386 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...
Page 387: ...Manual ResistTel IP2 IP152 Page 387 ExResistTel IP2 IP154 ...
Page 390: ...Page 390 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...
