Page 376
Manual
ResistTel IP2 / IP152
ExResistTel IP2 / IP154
5
Appendix
5.1
Safety Instructions
The manufacturer assumes no responsibility for any personal injury, damage to
property or subsequent damage that can be attributed to improper use of the device.
FHF Funke + Huster Fernsig GmbH, hereby declares that the device complies with all
basic requirements of the European Directive 1999/5/EG.
5.1.1
Power Supply
The external power supply is designed for operation with Power over LAN or external
supply. The power supply to the device can be interrupted by pulling the LAN cable
only while using PoE.
The equipment cannot be operated during a mains failure. The equipment settings
however are retained.
5.1.2
Installation and Connection
Lay the connection cables in such a way that no-one can trip over them. None of the
cables may be bent excessively, pulled or subjected to mechanical strain.
5.1.3
Cleaning
Do not use any chemicals or abrasives.
5.1.4
Maintenance
The equipment does not require any maintenance.
5.1.5
Malfunctions
There is no need to open the device if it is operated and serviced as intended.
Do not open or reconnect faulty equipment. In this case, return the equipment to
your dealer or service centre. Keep the original packaging in case you need to return
the equipment, since it provides ideal protection.
Back up all entries (e.g. on a PC) to avoid losing data.
Summary of Contents for ExResistTel IP2/IP154
Page 43: ...Manual ResistTel IP2 IP152 Page 43 ExResistTel IP2 IP154 Figure 9 Set View ...
Page 386: ...Page 386 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...
Page 387: ...Manual ResistTel IP2 IP152 Page 387 ExResistTel IP2 IP154 ...
Page 390: ...Page 390 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...