Page 126
Manual
ResistTel IP2 / IP152
ExResistTel IP2 / IP154
4.
Use the arrow keys to select the menu
Do not disturb
.
5.
Press the key . The display appears in Figure 92.
Direct dial: Off
Number:
Delay (seconds): 0
+
Direct dial
Figure 92: Menu Direct dial
6.
Use the cursor keys to select the line
Direct dial
.
7.
If you press the key at this point, you can switch between "On" and "Off".
8.
Use the cursor keys to select the line
Number
.
9.
Enter the desired Direct dial number.
10.
Use the cursor keys to select the line
Delay
.
11.
Enter the delay in seconds. Valid values are between 0 and 65535 seconds.
12.
In order to store the selection, leave the menu by pressing the key three
times.
The set direct call is now active and is not indicated in the display of the telephone.
If you set a delay t > 0 seconds after picking up the receiver, you have t seconds to
make a call. Only when this time has expired, the programmed telephone number
will be dialled.
Note
If the direct dial is active and the delay is set to 0 seconds, then after the try to
enter digits in the idle state the following error message will be displayed: keyboard
locked!
Also with active direct dial no inquiry calls can be made.
Summary of Contents for ExResistTel IP2/IP154
Page 43: ...Manual ResistTel IP2 IP152 Page 43 ExResistTel IP2 IP154 Figure 9 Set View ...
Page 386: ...Page 386 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...
Page 387: ...Manual ResistTel IP2 IP152 Page 387 ExResistTel IP2 IP154 ...
Page 390: ...Page 390 Manual ResistTel IP2 IP152 ExResistTel IP2 IP154 ...
