Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 70 / 970

70 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Accessing the Switch
traceroute
traceroute [vr <vrid>} | <host>] {from <source IP address>} {ttl <number>}
{port <port number>} {icmp}
Description
Enables you to trace the routed path between the switch and a destination endstation.
Syntax Description
Default
N/A.
Usage Guidelines
Each router along the path is displayed.
Example
The following command enables the traceroute function to a destination of 123.45.67.8:
traceroute 123.45.67.8
History
This command was first available in ExtremeWare XOS 10.1.
vr Specifies a virtual router.
vrid Specifies which virtual router.
host Specifies the hostname or IP address of the destination endstation.
from <source IP address> Uses the specified source address in the ICMP packet. If not specified, the
address of the transmitting interface is used.
ttl <number> Configures the switch to trace up to the time-to-live number of the switch.
port <port number> Specifies the UDP port number.
icmp Configures the switch to send ICMP echo messages to trace the routed path
between the switch and a destination endstation.