Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 751 / 970

enable rip export
ExtremeWare XOS 11.0 Command Reference Guide 751
enable rip export
enable rip export [bgp | direct | e-bgp | i-bgp | ospf | ospf-extern1 |
ospf-extern2 | ospf-inter | ospf-intra | static] [cost <number> {tag
<number>} | policy <policy-name>]
Description
Enables RIP to redistribute routes from other routing functions.
Syntax Description
Default
Disabled.
Usage Guidelines
This command enables the exporting of BGP, static, direct, and OSPF-learned routes into the RIP
domain. You can choose which types of OSPF routes are injected, or you can simply choose
ospf
, which
will inject all learned OSPF routes regardless of type.
The cost metric is inserted for all RIP-learned, static, and direct routes injected into RIP. If the cost
metric is set to 0, the cost is inserted from the route. For example, with BGP, the cost could be the MED
or the length of the BGP path. The tag value is used only by special routing applications. Use 0 if you
do not have specific requirements for using a tag.
Each protocol can have a policy associated with it to control or modify the exported routes.
Example
The following command enables RIP to redistribute routes from all OSPF routes:
enable rip export ospf cost 0
bgp Specifies BGP routes.
direct Specifies interface routes (only interfaces that have IP forwarding enabled are
exported).
e-bgp Specifies E-BGP routes.
I-bgp Specifies I-BGP routes.
ospf Specifies all OSPF routes.
ospf-intra Specifies OSPF-intra area routes.
ospf-inter Specifies OSPF-inter area routes.
ospf-extern1 Specifies OSPF external route type 1.
ospf-extern2 Specifies OSPF external route type 2.
static Specifies static routes.
cost <number> Specifies the
cost
metric, from 0-15. If set to 0, RIP uses the route metric
obtained from the route origin.
tag <number> Specifies a tag number.
<policy-name> Specifies a policy.