Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 308 / 970

308 ExtremeWare XOS 11.0 Command Reference Guide
QoS Commands
• IQP3 - 3, Normal
• IQP4 - 4, NormalHi
• IQP5 - 5, Medium
•
IQP6 - 6, MediumHi
• IQP7 - 7, High
• IQP8 - 8, HighHi (highest priority)
• Egress priority
— QP1 - 1, Low
— QP2 - 2, LowHi
—
QP3 - 3, Normal
— QP4 - 4, NormalHi
— QP5 - 5, Medium
— QP6 - 6, MediumHi
— QP7 - 7, High
— QP8 - 8, HighHi (highest priority)
Usage Guidelines
The number of ingress queues per port varies between the 1G I/O module and the 10G module. On the
1G module, you have two ingress queues per port. The priority values of 1 to 4 map to the first queue,
and the priority values of 5 to 8 map to the second queue. On the 10G module, you have eight ingress
queues per port. The priority values of 1 to 8 map one to each of the eight queues.
Example
The following command resets the ingress rate shaping parameters for all ports to default settings:
unconfigure qosprofile ingress ports all
History
This command was first available in ExtremeWare XOS 11.0.