Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 141 / 970

show power
ExtremeWare XOS 11.0 Command Reference Guide 141
show power
show power {<ps_num>} {detail}
Description
Displays the current status of the installed power supplies.
Command Syntax
Default
N/A.
Usage Guidelines
Use this command to view detailed information about the health of the power supplies.
This status information may be useful for your technical support representative if you have a network
problem.
The switch collects the following power supply information:
• State—Indicates the current state of the power supply. Options are:
— Empty: There is no power supply installed.
— Power Failed: The power supply has failed.
— Power Off: The power supply is off.
— Power On: The power supply is on and working normally.
• PartInfo—Provides information about the power supply including the:
— Serial number, a collection of numbers and letters, that make up the serial number of the power
supply.
— Part number, a collection of numbers and letters that make up the part number of the power
supply.
• Revision—Displays the revision number of the power supply.
• FailureCode—Specifies the failure code of the power supply.
• Odometer—Specifies the date and how long the power supply has been operating.
• Temperature—Specifies, in celsius, the current temperature of the power supply.
• Input—Specifies the input of the power supply.
• Output 1 and Output 2—Specifies the output of the power supply.
In ExtremeWare XOS 10.1 and earlier, use the
show powersupplies {detail}
command to view
detailed health information about the power supplies.
ps_num Specifies the slot number of the installed power supply.
detail The detail option is reserved for future use.