Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 268 / 970

268 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Virtual Routers
configure vr delete ports
configure vr <vr-name> delete ports <portlist>
Description
Removes a list of ports from the virtual router specified.
Syntax Description
Default
By default, all ports are assigned to the virtual router, VR-Default.
Usage Guidelines
When a new virtual router is created, by default, no ports are assigned, no VLAN interface is created,
and no support for any routing protocols is added. Use this command to remove ports from a virtual
router. Since all ports are initially assigned to VR-Default, you may need to delete the desired ports first
from the virtual router where they reside, before you add them to the desired virtual router.
Example
The following command removes all the ports on slot 2 from the virtual router vr-acme :
configure vr vr-acme delete ports 2:*
History
This command was first available in ExtremeWare XOS 11.0.
vr-name Specifies the name of the virtual router.
portlist Specifies the ports to remove from the virtual router.