Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 164 / 970

164 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Managing the Switch
show snmpv3 extreme-target-addr-ext
show snmpv3 extreme-target-addr-ext [[hex <hex_addr_name>] | <addr_name>]
Description
Displays information about SNMPv3 target addresses enhanced or standard mode.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display entries in the SNMPv3 extremeTargetAddressExtTable.
Example
The following command displays the entry for the target address named A1 :
show snmpv3 extreme-target-addr-ext A1
The following is sample output from this command:
Target Addr Name : A1
Mode : Enhanced
IgnoreMPModel : No
UseEventComm : Yes
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_addr_name
parameter was added in ExtremeWare XOS 11.0.
hex_addr_name Specifies an identifier for the target address. The value is to be supplied as a
colon separated string of hex octets.
addr_name Specifies a string identifier for the target address.