Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 257 / 970

show vlan
ExtremeWare XOS 11.0 Command Reference Guide 257
show vlan
show vlan {detail |<vlan_name> {stpd}}
Description
Displays information about VLANs.
Syntax Description
Default
Summary information for all VLANs on the device.
Usage Guidelines
Unlike many other VLAN-related commands, the keyword “vlan” is required in all forms of this
command except when requesting information for a specific vlan.
Use the command
show vlan
to display summary information for all VLANs. It shows various
configuration options as a series of “flags” (see the example below). VLAN and protocol names may be
abbreviated in this display.
Use the command
show vlan detail
to display detailed information for all VLANs. This displays the
same information as for an individual VLAN, but shows every VLAN, one-by-one. After each VLAN
display you can elect to continue or quit.
Protocol
none
indicates that this VLAN was configured with a user-defined protocol that has
subsequently been deleted.
detail Specifies that detailed information should be displayed for each VLAN.
vlan_name Specifies a VLAN name.
stpd Specifies that STP domains displays for each VLAN.