Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 283 / 970

configure diffserv examination code-point
ExtremeWare XOS 11.0 Command Reference Guide 283
configure diffserv examination code-point
configure diffserv examination code-point <code-point> [qosprofile
<qosprofile>]
Description
Configures the default ingress DiffServ code points (DSCP) to QoS profile mapping.
Syntax Description
Default
See Table 9.
Usage Guidelines
You can specify up to 64 different code points for each port. Code point values are grouped and
assigned to the default QoS profiles as shown in Table 9:
Example
The following command specifies that code point 25 be assigned to QP2:
configure diffserv examination code-point 25 qosprofile qp2
History
This command was first available in ExtremeWare XOS 11.0.
code-point Specifies a DiffServ code point (a 6-bit value in the IP-TOS byte in the IP
header).
qosprofile Specifies the QoS profile to which the DiffServ code point is mapped.
Table 9: Default code point-to-QoS profile mapping
Code Point QoS Profile
0-7 QP1
8-15 QP2
16-23 QP3
24-31 QP4
32-39 QP5
40-47 QP6
48-55 QP7
56-63 QP8