Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 94 / 970

94 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Managing the Switch
configure snmpv3 add target-addr
configure snmpv3 add target-addr [[hex <hex_addr_name] | <addr_name>] param
[[hex <hex_param_name] | <param_name>] ipaddress [[<ip_address>
{<netmask>}] | <ip_address>] {transport-port <port_number> {from
<src_ip_address>} {tag-list <tag_list>} {volatile}
Description
Adds and configures an SNMPv3 target address and associates filtering, security, and notifications with
that address.
Syntax Description
Default
The default values are:
• transport-port—port 162
• non-volatile storage
If you do not specify
tag-list
the single tag defaultNotify , a pre-defined value in the snmpNotifyTable,
is used.
Usage Guidelines
Use this command to create an entry in the SNMPv3 snmpTargetAddressTable. The
param
parameter
associates the target address with an entry in the snmpTargetParamsTable, which specifies security and
storage parameters for messages to the target address, and an entry in the snmpNotifyFilterProfileTable,
which specifies filter profiles to use for notifications to the target address. The filter profiles are
associated with the filters in the snmpNotifyFilterTable.
Example
The following command specifies a target address of 10.203.0.22 with the name A1 , and associates it
with the security parameters and target address parameter P1 :
configure snmpv3 add target-addr A1 param P1 ipaddress 10.203.0.22
hex_addr_name Specifies a string identifier for the target address. The value is to be supplied
as a colon separated string of hex octets.
addr_name Specifies a string identifier for the target address in ASCII format.
hex_param_name Specifies the parameter name associated with the target. The value is to be
supplied as a colon separated string of hex octets.
param_name Specifies the parameter name associated with the target in ASCII format.
ip_address Specifies an SNMPv3 target IP address.
port_number Specifies a UDP port. Default is 162.
src_ip_address Specifies the IP address of a VLAN to be used as the source address for the
trap.
tag-list Specifies a string identifier for the notifications to be sent to the target.
volatile Specifies volatile storage.