Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 112 / 970

112 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Managing the Switch
configure snmpv3 delete user
configure snmpv3 delete user [all-non-defaults | [[hex <hex_user_name>] |
<user_name>]]
Description
Deletes an existing SNMPv3 user.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to delete an existing user.
Use the
all-non-defaults
keyword to delete all users, except for the default (permanent) users. The
default user names are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv .
Deleting a user will not implicitly remove the related group to user association from the
VACMSecurityToGroupTable. To remove the association, use the following command:
configure snmpv3 delete group {[[hex <hex_group_name>] | <group_name>]} user
[all-non-defaults | {[[hex <hex_user_name>] | <user_name>] {sec-model
[snmpv1|snmpv2c|usm]}}]
Example
The following command deletes all non-default users:
configure snmpv3 delete user all-non-defaults
The following command deletes the user guest :
configure snmpv3 delete user guest
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_user_name
parameter was added in ExtremeWare XOS 11.0.
all-non-defaults Specifies that all non-default (non-permanent) users are to be deleted.
hex_user_name Specifies the user name to delete. The value is to be supplied as a colon
separated string of hex octets.
user_name Specifies the user name to delete.