Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 259 / 970

show vman
ExtremeWare XOS 11.0 Command Reference Guide 259
show vman
show vman {<vlan_name> | etherType | detail}
Description
Displays information about VMANs.
Syntax Description
Default
Summary information for all VMANs on the device.
Usage Guidelines
None.
Example
The following is an example of the display from the
show vman
command:
-------------------------------------------------------------------------------
Name VID Protocol Addr Flags Proto Ports Virtual
Active router
/Total
-------------------------------------------------------------------------------
peggy 4092 -------------------- ------------- ANY 0 /0 VR-Default
-------------------------------------------------------------------------------
Flags : (E) ESRP Slave, (f) IP Forwarding Enabled, (i) ISIS Enabled,
(I) IP Forwarding lpm-routing Enabled, (L) Loopback Enabled,
(m) IPmc Forwarding Enabled, (M) ESRP Master,
(n) IP Multinetting Enabled, (o) OSPF Enabled, (p) PIM Enabled,
(r) RIP Enabled, (T) Member of STP Domain, (v) VRRP Enabled
Total number of Vlan(s) : 3
The following is an example of the display from the
show vman <vlan_name>
command:
VLAN Interface with name my_vman_tunnel created by user
Tagging: 802.1Q Tag 4094
Priority: 802.1P Priority 0
Virtual router: VR-Default
Primary IP: 10.0.0.1/8
STPD: None
Protocol: Match all unfiltered protocols
Loopback: Disable
Rate Shape: Disable
QosProfile: QP1
Ports: 2. (Number of active ports=2)
vlan_name Specifies information is displayed for particular VMAN.
etherType Specifies that Ethertype information is displayed for each VMAN.
detail Specifies all information is displayed for each VMAN.