Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 585 / 970

configure vrrp vlan vrid add track-iproute
ExtremeWare XOS 11.0 Command Reference Guide 585
configure vrrp vlan vrid add track-iproute
configure vrrp vlan <vlan_name> vrid <vridval> add track-iproute
<ipaddress>/<masklength>
Description
Creates a tracking entry for the specified route. When this route becomes unreachable, this entry is
considered to be failing.
Syntax Description
Default
N/A.
Usage Guidelines
The route specified in this command may not exist in the IP routing table. When you create the entry
for a route, an immediate VRRP failover may occur.
Example
The following command enables IP route failure tracking for routes to the specified subnet:
configure vrrp vlan vlan-1 vrid 1 add track-iproute 3.1.0.0/24
History
This command was first available in ExtremeWare XOS 10.1.
vlan_name Specifies the name of a VRRP VLAN.
vridval Specifies the virtual router ID of the target VRRP virtual router. Value can be
in the range of 1-255.
ipaddress Specifies the prefix of the route to track.
masklength Specifies the length of the route's prefix.