Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 570 / 970

570 ExtremeWare XOS 11.0 Command Reference Guide
ESRP Commands
configure esrp timer restart
configure esrp <esrpDomain> timer restart <seconds>
Description
Configures the ESRP restart timer value.
Syntax Description
Default
The default restart timer value is 30 seconds.
Usage Guidelines
The restart timer specifies the amount of time that the neighbor ESRP switch remains in its current state
during a hitless failover. This timer prevent the slave ESRP switch from trying to become master during
a hitless failover.
The
seconds
range is 15-1024.
To view the restart settings, use the
show esrp {<name>}
command.
Example
The following command configures the restart timer value to 40 seconds for the ESRP domain
esrp1
:
configure esrp esrp-1 timer restart 40
History
This command was first available in ExtremeWare XOS 11.0.
esrpDomain Specifies an ESRP domain name.
seconds Specifies the maximum length of time, in seconds, that the neighbor ESRP
switch remains in its current state during an MSM hitless failover. The range is
15 to 1024.