Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 798 / 970

798 ExtremeWare XOS 11.0 Command Reference Guide
BGP Commands
configure bgp neighbor description
configure bgp neighbor [all | <remoteaddr>] description {<description>}
Description
Configures a description for a BGP neighbor.
Syntax Description
Default
The description is a NULL string by default.
Usage Guidelines
Use this command to attach a description to a BGP neighbor. This description will be displayed in the
output of the
show bgp neighbor
command when you specify the
detail
option, or when you specify
a particular neighbor. Enclose the string in double quotes if there are any blank spaces in the string. The
maximum length of the string is 56 characters.
If you do not specify the
<description>
parameter, the description will be reset to the default.
Example
The following command configures the description for the BGP neighbor 192.168.1.22 to Toledo_5 :
configure bgp neighbor 192.168.1.22 description Toledo_5
History
This command was first available in ExtremeWare XOS 11.0.
remoteaddr Specifies an IP address of a BGP neighbor.
all Specifies all neighbors.
description Specifies a string used to describe the neighbor.