Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 329 / 970

configure log target severity
ExtremeWare XOS 11.0 Command Reference Guide 329
To see the current configuration of a target, use the following command:
show log configuration target {console | memory-buffer | nvram | primary-msm |
backup-msm | session | syslog <ipaddress> [local0 ... local7]}
To see the current configuration of a filter, use the following command:
show log configuration filter {<filter name>}
Example
The following command sends log messages to the current session, that pass the current filter at a
severity level of info or greater, and contain the string
user5 :
configure log target session severity info
History
This command was first available in ExtremeWare XOS 10.1.
The
primary-msm
and
backup-msm
options were first available in ExtremeWare XOS 11.0.