Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 764 / 970

764 ExtremeWare XOS 11.0 Command Reference Guide
IGP Commands
show ospf lsdb
show ospf lsdb {detail | stats} {area [<area-identifier> | all]}
{{lstype} [<lstype> | all]} {lsid <lsid-address>{<lsid-mask>}}
{routerid <routerid-address> {<routerid-mask>}}
{interface[[<ip-address>{<ip-mask>} | <ipNetmask>] | vlan <vlan-name>]}
Description
Displays a table of the current Link-State Database (LSDB).
Syntax Description
Default
Display in summary format.
Usage Guidelines
ExtremeWare XOS provides several filtering criteria for the
show ospf lsdb
command. You can specify
multiple search criteria and only the results matching all of the criteria are displayed. This allows you to
control the displayed entries in large routing tables.
A common use of this command is to omit all optional parameters, resulting in the following shortened
form:
show ospf lsdb
The shortened form displays all areas and all types in a summary format.
You can filter the display using either the area ID, the remote router ID, or the link-state ID. The default
setting is
all
with no detail. If detail is specified, each entry includes complete LSA information.
Example
The following command displays all areas and all types in a summary format:
show ospf lsdb
detail Specifies to display all fields of matching LSAs in a multi-line format.
stats Specifies to display the number of matching LSAs, but not any of their
contents.
area-identifier Specifies an OSPF area.
all Specifies all OSPF areas.
lstype Specifies an LS type
lsid Specifies an LS ID.
lsid-mask Specifies an LS ID mask
interface Specifies to display interface types.
routerid-address Specifies a LSA router ID address.
vlan-name Specifies a VLAN name.