Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 477 / 970

configure eaps fast-convergence
ExtremeWare XOS 11.0 Command Reference Guide 477
configure eaps fast-convergence
configure eaps fast-convergence [off | on]
Description
Enables EAPS to converge more quickly.
Syntax Description
Default
Default is off.
Usage Guidelines
This command acts on the switch, not per domain.
In certain environments to keep packet loss to a minimum when the ring is broken, configure EAPS
with fast-convergence turned on. If fast convergence is turned on, it will be displayed under the
show
eaps
command. For example:
show eaps
EAPS Enabled: No
EAPS Fast-Convergence: Off
Number of EAPS instances: 0
# EAPS domain configuration :
--------------------------------------------------------------------------------
Domain State Mo En Pri Sec Control-Vlan VID Count
--------------------------------------------------------------------------------
NOTE
If fast-convergence is turned on, the link filters on all EAPS ring ports are turned off. This can result
problems if the port’s hardware encountered a problem and started “flapping” between link-up/link-down
states.
Example
The following command configures fast convergence for EAPS domain “eaps_1”:
configure eaps fast-convergence on
History
This command was first available in ExtremeWare XOS 11.0.
off Turns fast-convergence off. Default is off.
on Turns fast-convergence on.