Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 29 / 970

ExtremeWare XOS 11.0 Command Reference Guide 29
1
Command Reference Overview
Introduction
This guide provides details of the command syntax for all ExtremeWare ® XOS commands as of
ExtremeWare XOS version 11.0.
NOTE
ExtremeWare XOS 11.0 only supports Extreme Networks BlackDiamond
®
10800 family of products.
This does not include the other BlackDiamond families, Alpine, Summit “i” series, Summit e-series and
Summit 200 series platforms.
This guide does not provide feature descriptions, explanations of the technologies, or configuration
examples. For information about the various features and technologies supported by Extreme Networks
switches, see the installation and user guides for your product. This guide does not replace the
installation and user guides; this guide supplements the installation and user guides.
Audience
This guide is intended for use by network administrators who are responsible for installing and setting
up network equipment. It assumes a basic working knowledge of the following:
•
Local area networks (LANs)
• Ethernet concepts
• Ethernet switching and bridging concepts
• Routing concepts
•
Internet Protocol (IP) concepts
• Routing Information Protocol (RIP) and Open Shortest Path First (OSPF) concepts
•
Border Gateway Protocol (BGP-4) concepts
• IP Multicast concepts
• Protocol Independent Multicast (PIM) concepts
• Internet Packet Exchange (IPX) concepts