Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 346 / 970

346 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Status Monitoring and Statistics
disable log target
disable log target [console | memory-buffer | nvram | primary-msm |
backup-msm | session | syslog [all | <ipaddress> ] {vr <vr_name> [local0
... local7]]]
Description
Stops sending log messages to the specified target.
Syntax Description
Default
Enabled, for memory buffer, NVRAM, primary MSM, and backup MSM; all other targets are disabled
by default.
Usage Guidelines
This command stops sending messages to the specified target. By default, the memory buffer, NVRAM,
primary MSM, and backup MSM targets are enabled. Other targets must be enabled before messages
are sent to those targets.
Configuration changes to the
session
target are in effect only for the duration of the console display or
telnet session, and are not saved in FLASH. Changes to the other targets are saved to FLASH.
Note that the
backup-msm
target is only active on the primary MSM, and the
primary-msm
target is only
active on the backup MSM.
Example
The following command disables log messages to the current session:
disable log target session
console Specifies the console display.
memory-buffer Specifies the switch memory buffer.
nvram Specifies the switch NVRAM.
primary-msm Specifies the primary MSM.
backup-msm Specifies the backup MSM.
session Specifies the current session (including console display).
syslog Specifies a syslog target.
all Specifies all of the remote syslog servers.
ipaddress Specifies the syslog host name or IP address.
vr_name Specifies the virtual router that can reach the server IP address.
local0 ... local7 Specifies the local syslog facility.