Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 406 / 970

406 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Status Monitoring and Statistics
unconfigure sflow collector
unconfigure sflow collector {ipaddress} <ip-address> {port
<udp-port-number>} {vr <vrname>}
Description
Unconfigures the sFlow collector.
Syntax Description
Default
The following values are the defaults for this command:
• UDP port number—6343
• Virtual router—VR-Mgmt (previously called VR-0).
Usage Guidelines
This command allows you to reset the specified sFlow collector parameters to the default values.
Both the commands
unconfigure sflow
and
unconfigure sflow collector
will reset the collector
parameters to the default.
Example
The following command specifies that sFlow data should be sent to port 6343 at IP address 192.168.57.1
using the virtual router
VR-Mgmt :
configure sflow collector ipaddress 192.168.57.1
History
This command was first available in ExtremeWare XOS 11.0.
ip-address Specifies the IP address of the collector to reset.
udp-port-number Specifies the UDP port.
vrname Specifies which virtual router.