Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 194 / 970

194 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
configure sharing add ports
configure sharing <master_port> add ports <port_list>
Description
Adds ports to a load-sharing group
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to dynamically add ports to a load-sharing group.
VMAN ports can belong to load-sharing groups. If any port in the load-sharing group is enabled for
VMAN, all ports in the group are automatically enabled to handle jumbo size frames. Also, VMAN is
automatically enabled on all ports of the untagged load-sharing group.
To verify your configuration, use the
show ports sharing
command.
Example
The following example adds port 3:13 to the load-sharing group with the master port 3:9:
configure sharing 3:9 add port 3:13
History
This command was first available in ExtremeWare XOS 10.1.
master_port Specifies the master port for a load-sharing group.
port_list Specifies one or more slots and ports to be grouped to the master port. May
be in the form 3-5, 2:5, 2:6-2:8.