Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 531 / 970

show stpd ports
ExtremeWare XOS 11.0 Command Reference Guide 531
The following is sample output from this command:
Port Mode State Cost Flags Priority Port ID Designated Bridge
3:1 802.1D FORWARDING 100 e------- 16 16641 00:00:00:00:00:00:00:00
3:2 802.1D FORWARDING 100 e------- 16 16642 00:00:00:00:00:00:00:00
3:3 802.1D FORWARDING 100 e------- 16 16643 00:00:00:00:00:00:00:00
Total Ports: 3
------------------------- Flags: ----------------------------
1: e=Enable, d=Disable
2: (Port role) R=Root, D=Designated, A=Alternate, B=Backup
3: (Config type) b=broadcast, p=point-to-point, e=edge, a=auto
4: (Oper. type) b=broadcast, p=point-to-point, e=edge
5: p=proposing, a=agree
6: (partner mode) d = 802.1d, w = 802.1w, s = 802.1s
7: i = edgeport inconsistency
The following command displays the detailed information for the ports in STPD S0 :
show stpd S0 ports detail
The following is sample output from this command:
Stpd: s0 Port: 1:1 PortId: 8002 Stp: ENABLED Path Cost: 19
Port Mode: 802.1D
Port State: FORWARDING Topology Change Ack: FALSE
Port Priority: 16
Designated Root: 00:00:00:00:00:00:00:00 Designated Cost: 0
Designated Bridge: 00:00:00:00:00:00:00:00 Designated Port Id: 0
Partner STP version: Dot1d
Participating Vlans: Default
Stpd: s0 Port: 1:2 PortId: 8002 Stp: ENABLED Path Cost: 19
Port Mode: 802.1D
Port State: FORWARDING Topology Change Ack: FALSE
Port Priority: 16
Designated Root: 00:00:00:00:00:00:00:00 Designated Cost: 0
Designated Bridge: 00:00:00:00:00:00:00:00 Designated Port Id: 0
Partner STP version: Dot1d
Participating Vlans: Default
History
This command was available in ExtremeWare XOS 10.1.