Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 426 / 970

426 ExtremeWare XOS 11.0 Command Reference Guide
Security Commands
configure tacacs-accounting server
configure tacacs-accounting [primary | secondary] server [<ipaddress> |
<hostname>] {<udp_port>} client-ip <ipaddress> {vr <vr_name>}
Description
Configures the accounting server.
Syntax Description
Default
Unconfigured. The default virtual router is VR-0, the management virtual router.
Usage Guidelines
You can use the same server for accounting and authentication.
To remove a server, use the following command:
unconfigure tacacs server [primary | secondary]
Example
The following command configures server tacacs1 as the primary accounting server for client
switch 10.10.20.35 using a virtual router interface of VR-2:
configure tacacs-accounting primary server tacacs1 client-ip 10.10.20.35 vr vr-2
History
This command was available in ExtremeWare XOS 10.1.
primary Configures the primary accounting server.
secondary Configures the secondary accounting server.
ipaddress The IP address of the accounting server being configured.
hostname The host name of the accounting server being configured.
tcp_port The TCP port to use to contact the server.
ipaddress The IP address used by the switch to identify itself when communicating with
the accounting server.
vr_name Specifies the virtual router on which the client IP is located.