Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 396 / 970

396 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Status Monitoring and Statistics
show temperature
show temperature
Description
Displays the current temperature of the I/O modules, management modules, and the power supply
controllers.
Syntax Description
This command has no arguments or variables
Default
N/A.
Usage Guidelines
Use this command to display the temperature in celsius and the current status of the following installed
components in the BlackDiamond 10808 chassis:
• MSM
• I/O modules
• Power controllers
The switch monitors the temperature of each component and generates a warning if the temperature
exceeds the normal operating range. If the temperature exceeds the minimum/maximum limits, the
switch shuts down the overheated module.
You can also view the temperature of the power supplies and fan trays in the switch.
To view the temperature of the powersupplies, use the following command:
show power {<ps_num>} {detail}
To view the temperature of the fan trays, use the following command:
show fans {detail}
Example
The following command displays the temperature of the system and I/O and management modules:
show temperature
The following is sample output from this command:
Field Replaceable Units Temp (C) Status
------------------------------------------------
Slot-1 : 10G6X 36.37 Normal
Slot-2 : G60X 35.31 Normal
Slot-3 :
Slot-4 :
Slot-5 :