Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 214 / 970

214 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
show edp
show edp {ports [all | <ports>] {detail}}
Description
Displays connectivity and configuration information for neighboring Extreme Networks switches.
Syntax Description
Default
N/A.
Usage Guidelines
On a modular switch,
<ports>
can be a list of slots and ports. For a detailed explanation of port
specification, see “Modular Switch Numerical Ranges” in Chapter 1.
Use the
show edp
command to display neighboring switches and configurations. This is most effective
with Extreme Networks switches.
Example
The following command displays the configuration of the switch:
show edp
Following is sample output from this command:
EDP advert-interval :60 seconds
EDP holddown-interval :180 seconds
EDP enabled on ports :1:1 1:2 1:3 1:4 1:5 1:6 3:1 3:2 3:3 3:4
Following is sample output from the
show edp ports 1:1
command:
Port Neighbor Neighbor-mac Remote Age Num
Port Vlans
=============================================================================
1:1 Oban 00:00:00:30:48:41:ed:97 1:1 54 1
=============================================================================
ports Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
detail Show detailed information.