Extreme Networks ExtremeWare XOS 11.0, Command Reference Manual

Page: 567 / 970

configure esrp timer neighbor
ExtremeWare XOS 11.0 Command Reference Guide 567
configure esrp timer neighbor
configure esrp <esrpDomain> timer neighbor <seconds>
Description
Configures the ESRP neighbor timeout value.
Syntax Description
Default
The default neighbor timeout is 8 seconds (four times the hello timer).
Usage Guidelines
The neighbor timeout specifies the amount of time that ESRP waits before considering the neighbor
down. The neighbor value must be at least 3 times the hello timer value. Entering a value outside of
that range generates an error message similar to the following:
operation Failed. Valid timer relationship "neighbor timeout >= 3*hello ; neutral
timeout >= 2*hello ; premaster timeout >= 3*hello"!
The
seconds
range is 6 to 1024 seconds.
To see the neighbor settings, use the
show esrp {<name>}
command.
Example
The following command configures the ESRP neighbor timeout to 14 seconds for the ESRP domain
esrp1 :
configure esrp esrp1 timer neighbor 14
History
This command was first available in ExtremeWare XOS 11.0.
esrpDomain Specifies an ESRP domain name.
seconds Specifies the number of seconds after which an ESRP neighbor times out.
The range is 6 to 1024 seconds.