Epson DM-M820 Technical Reference Manual Download Page 261

Page: 261 / 324

Rev. I

Disassembly and Assembly

9-45

MR Series Technical Reference Manual

RAID Card

A RAID card can be inserted into the upper slot on the riser frame.

1. Remove the IM-800 upper case. (See page 9-42.)

2. Remove the riser frame. (See page 9-43.)

3. Remove the HDD cable from the RAID card.

4. Remove the screw (S13) securing the PCI board (indicated below) to remove the RAID card.

When replacing the PCI card, remove the dummy plate, if it is installed.

CAUTION:

Do not touch the connectors on the card to avoid failure due to contamination.

HDD cable

RAID card

screw (S13)

RAID card

Summary of Contents for DM-M820





































































































































































































































































































































Search results

Summary of Contents for DM-M820

Reviews:

Related manuals for DM-M820

Brands by name

Popular brands

Epson DM-M820, Technical Reference Manual

Search results

Summary of Contents for DM-M820

Reviews:

Related manuals for DM-M820

Brands by name

Popular brands